INSTALLATION
   1. Turn off the valve at the base of the wall as shown in Step 1.
   2. Flush your toilet to drain the water from your toilet tank
   3. Disconnect the hose at the underside of the toilet tank.
   4. Install the T fitting as shown in Step 2. Be sure to wrap Teflon tap around all threads to avoid leakage.
   5. Attach the valve to the outlet end of the T fitting as shown in Step 3.
   6. Connect the hose to valve by placing the rubber gasket between the nut and the valve. Tighten well. 
   7. Attach the hose to rinsing spray body. Be sure to insert the rubber gasket.
   8. Using the fastening set, insert the hanger at a convenient height within easy reach as show in Step 4.
   9. Test the rinsing spray to ensure there is no leakage.